translate
  1. Functional Accessibility Requirements
  2. 8. Hardware
  3. 8.3: Physical access to ICT
  4. 8.3.3: Reach range for ICT
  5. 8.3.3.2: Side reach
  6. 8.3.3.2.3: Obstructed side reach
  7. 8.3.3.2.3.1: Obstructed (<= 255 mm) side reach

8.3.3.2.3.1: Obstructed (<= 255 mm) side reach

Where the access space is integral to the ICT, allows a parallel approach and has an obstruction which is integral to the ICT, the height of the obstruction should be less than 865 mm (34 inches). Where the depth of the obstruction is less than or equal to 255 mm (10 inches), the high side reach to all essential controls should be no higher than 1 220 mm (48 inches) above the floor of the access space. This is shown in Figure 11 (a).

A diagram illustrating the content of the text 8.3.3.2.3.1 and 8.3.3.2.3.2
Figure 11: Obstructed high side reach

Testing methods

Type of compliance Inspection and measurement
Pre-conditions
  1. The access space is integral to the ICT.
  2. A parallel approach to the ICT is possible.
  3. There is an obstacle integral to the ICT with a height less than 865 mm.
  4. The side reach is obstructed by a part less than 255 mm wide.
Procedure
  1. Check that the height of the topmost essential control no higher than 1220 mm above the floor contact of the ICT.
Result If check 1 is true then this recommendation is followed.

There is currently no content classified with this term.